
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-100S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-100S is a compact double-acting cylinder with an external M16x1.5 adjustment screw that lets you dial the extend stop from 0 to 80 mm directly on the machine. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. Turning the screw sets the mechanical end position without shims or part changes.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 0 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site during carton size changeovers, ensuring precise flap positioning while the fixed NBR bumper absorbs the end shock.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 0-80 mm window.
Confirm the 50 mm bore, 80 mm maximum stroke, 100 mm adjustment window, and PT1/4 port. The -S code indicates the magnet is present for sensing, and the rod end uses a female M10x1.5 thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the end. For a held load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external M16x1.5 screw shortens the extend stop by up to 100 mm, yielding a usable extend range of 0 to 80 mm. The -S suffix means a built-in magnet is included for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.