
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-10SB is a compact double-acting double-rod cylinder engineered for on-site extend-stop tuning. An external M16x1.5 adjuster screw lets you dial the forward stroke down from 80 mm to 70 mm without swapping parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, plus a male M18x1.5 threaded rod end (-B) for secure load attachment. The short riveted body minimizes axial footprint where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 screw to set the 70-80 mm extend stop precisely during quick tooling swaps, ensuring the male M18x1.5 rod hits the exact target without shims.
Set the precise extend position for folding flaps on varying box sizes; the fixed NBR bumper absorbs the end shock while the male rod threads secure the custom jig.
Stepping down, the SDAJ40 delivers 628.3 N, whereas stepping up to the SDAJ63 provides 1558.6 N. Choose it when commissioning requires precise 70-80 mm extend tuning.
Confirm the 50 mm bore, 80 mm stroke, 10 mm window, and PT1/4 port match your pneumatic layout. The -S magnet and -B male M18x1.5 rod thread are included here. Note that a plain cylinder drifts if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end and does not lock the load. Use an external rod lock or pilot-operated check valve for load holding without live pressure.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.