
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend end-position down by 20 mm directly on your machine, yielding a usable extend range of 60 to 80 mm without swapping shims or parts. Retract travel remains full length, and the adjuster strictly sets the mechanical stop without altering the pneumatic area.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. Because this unit carries the -S option, a built-in piston magnet enables position sensing with AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly adjust the extend endpoint by up to 20 mm between different product runs, saving axial space in tight transfer modules.
Choose the 50 mm bore when you need that mid-tier thrust and the ability to fine-tune the extend stop within the 60-80 mm window during setup-heavy changeovers.
Confirm the 50 mm bore, 80 mm max stroke, 20 mm adjust window, and PT1/4 port match your pneumatic supply. The -S magnet accommodates reed or solid-state sensing, while the female M10x1.5 rod-end thread (or male M18x1.5 if specified) handles tooling attachment. Remember that a plain cylinder does not hold a load on air loss or valve centering—the piston drifts, as the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The R (M16x1.5) screw mechanically shortens the extend stop from the 80 mm maximum down to 60 mm without changing the output force. The -S suffix denotes a built-in piston magnet designed for AirTAC reed or electronic switches, which mount directly into the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.