
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-30SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-30SB is a double-acting compact cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward stroke down from the 85 mm maximum to 55 mm directly on the machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 rod end. The short riveted body saves axial mounting depth where larger profile cylinders will not fit. End shock is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. The unit operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 85 mm down to 55 mm to clamp raw castings of varying widths without swapping out the entire tooling cylinder.
Use the magnetic piston to confirm the extend position and the male M18x1.5 rod to push carton flaps, making quick 30 mm stroke adjustments during format changeovers.
Choose this specific unit if your fixture requires on-site stroke tuning between 55 and 85 mm, a male M18x1.5 rod thread, and a magnetic piston for position sensing.
Confirm your parameters match the SDAJ50X85-30SB code: 50 mm bore, 85 mm maximum stroke, 30 mm adjustment window, PT1/4 port, built-in magnet, and male rod. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 screw mechanically shortens the extend stroke anywhere between 55 mm and 85 mm without changing the output force. The built-in magnet allows you to use AirTAC reed or electronic solid-state switches to detect the piston position along this adjusted travel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.