
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-40S is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 45 and 85 mm, eliminating the need for shims or part swaps during machine commissioning.
Built with a short riveted body, this unit saves axial mounting depth where a longer cylinder would fail to fit. It includes a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. The adjuster is strictly a mechanical stop, not a mid-stroke lock, so the cylinder cannot hold a load if air pressure drops.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 85 mm via the M16x1.5 screw to accommodate varying fixture heights without machining new spacers.
It is the right choice for setups requiring frequent on-site stroke tuning across a 45-85 mm window.
Confirm your requirements for the PT1/4 port, the 20 mm piston rod, and the female M10x1.5 rod-end thread. The -S suffix ensures compatibility with AirTAC reed or solid-state sensors. Remember that a plain double-acting cylinder drifts when air is lost or a valve centers; the fixed NBR bumper only softens the end impact. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external R screw shortens the forward stroke by up to 40 mm, setting the extend position anywhere between 45 and 85 mm. The -S suffix denotes a built-in piston magnet designed to trigger AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.