
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-50 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw. This mechanism lets you dial the extend stop down from 85 mm to 35 mm directly on the machine, eliminating shims or part swaps during changeovers.
Its short riveted body significantly reduces axial mounting depth, fitting where larger profile cylinders cannot. The bore uses a PT1/4 air port and a 20 mm rod. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without switching to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend position from 35 to 85 mm on the fly to accommodate different raw material lengths on a single machining fixture without swapping physical stop blocks.
Choose this model if your fixture requires frequent on-site stroke tuning across a 35 to 85 mm window.
Confirm your parameters: 50 mm bore, 85 mm max stroke, 50 mm adjust window, PT1/4 port, female rod thread (M10x1.5), and no magnet. Note that a plain cylinder drifts when air is lost or the valve is centered—the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, allowing any end position between 35 mm and 85 mm without changing parts. This SKU has no piston magnet and cannot use reed or electronic switches; you must select the -S option code to enable sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.