verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke85 mm
  • Adjustable range35–85 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$91.88 $99.38Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S

The AirTAC SDAJ50X85-50S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine. You can set the outward travel anywhere from 35 to 85 mm without swapping shims or parts, while the retract stroke remains full length. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit.

A fixed NBR bumper decelerates the stroke end, and the built-in piston magnet supports AirTAC reed or electronic switches for precise position sensing.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke85 mm
Adjustable range35 – 85 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×85Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S Is Used

precision_manufacturing

Machine Changeover Dials

Dial the extend stop from 35 to 85 mm on-site to accommodate different part lengths during production line changeovers without changing hardware.

vertical_align_center

Trial Lift Positioning

Safely test vertical lifting heights up to a 50 kg load capacity by fine-tuning the outward mechanical stop before finalizing the setup.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S the Right Cylinder?

Choose this specific configuration when you need frequent on-machine stroke tuning for changeovers or trial positioning. Confirm your requirements for the 50 mm bore, 85 mm maximum stroke, 50 mm adjustment window, PT1/4 port, built-in magnet (S), and female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold a load on air loss or when the valve is centered; use an external rod lock or pilot-operated check valve for secure load holding.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S FAQ

The theoretical maximum push is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.

The -S suffix indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X85-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.