
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-75S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the outward stop anywhere between 10 and 85 mm, eliminating the need for shims or part swaps during changeovers.
The short riveted body conserves axial mounting depth where a longer profile cylinder would fail to fit. End-of-travel shock is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. This specific unit includes a built-in piston magnet, enabling position feedback when paired with AirTAC reed or electronic switches along the body grooves.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Accommodate rapidly changing box heights on a packaging line by turning the M16x1.5 adjuster screw to set the precise 50 kg vertical tamping depth.
Shift the outward stroke between mixed product runs, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach speed during changeovers.
Stepping down to the SDAJ40 yields 628.3 N, whereas moving up to the SDAJ63 provides 1558.6 N.
This model is ideal for operators needing frequent on-machine stroke tuning for trial positioning. Remember that a plain cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Configuration confirmed: 50 mm bore, 85 mm max stroke, 75 mm window, PT1/4 port, female M10x1.5 rod thread, and an -S magnet for solid-state or reed sensing.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The external screw shortens the extend end position from the 85 mm maximum down to 10 mm, but it acts only as a mechanical stop and does not alter force or lock mid-stroke. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.