
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X90-20 is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend end-position anywhere between 70 and 90 mm. Retract travel stays at the full 90 mm regardless of the extend setting.
Its short riveted body drastically cuts axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose an -S option if position sensing is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 90 mm during fixture swaps to align pressing depths without machining new spacers.
Set precise upper travel limits for a 50 kg lift application, relying on the fixed NBR bumper to soften the end impact.
Stepping down, the SDAJ40 delivers 628.3 N, whereas stepping up to the SDAJ63 yields 1558.6 N.
Choose this unit if your fixture requires on-site stroke tuning during changeovers, but remember it will not hold a load if air pressure drops or the valve centers. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 90 mm max stroke, 20 mm window, PT1/4 port, female M10x1.5 rod thread, and the absence of a magnet for this configuration.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw mechanically shortens the extend stroke by up to 20 mm, allowing on-machine positioning between 70 and 90 mm. It acts purely as a stop and does not alter the cylinder's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.