verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke90 mm
  • Adjustable range70–90 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$82.78 $90.28Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B

The AirTAC SDAJ50X90-20B is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw that lets you dial the extend stop down from 90 mm to 70 mm directly on the machine. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit.

This specific SKU includes a male-threaded M18x1.5 piston rod for secure external mounting and uses a PT1/4 air port. A fixed NBR bumper handles end-of-stroke deceleration, but it is not an adjustable air cushion or a mid-stroke lock. Note that this configuration lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke90 mm
Adjustable range70 – 90 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×90Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B Is Used

precision_manufacturing

Machining Clamps

Dials the 90 mm extend stop down to 70 mm to position workpiece clamps precisely against varying part heights without machining custom spacers.

vertical_align_center

Vertical Lift Stops

Sets a precise lower mechanical stop for a 50 kg vertical lift tool, preventing overtravel while relying on the fixed NBR bumper to absorb the final impact energy.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B the Right Cylinder?

Choose this male-rod (B) model if your fixture requires an externally threaded M18x1.5 rod end and you need on-site stroke tuning to perfect a 70-90 mm extend position. Remember that a plain SDAJ does not hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm maximum stroke, 20 mm window, PT1/4 port, and lack of magnet for this build.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B FAQ

At 0.7 MPa the push increases to 1374.4 N and the pull to 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa.

Turning the external M16x1.5 adjuster screw mechanically shortens the extend stroke from its 90 mm maximum down to 70 mm. It only sets the end stop position and does not alter the output force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X90-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.