
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X90-20S is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the forward stop anywhere between 70 and 90 mm, eliminating the need for shims or part swaps during changeovers. The short riveted body saves valuable axial mounting depth where a longer profile cylinder will not fit.
This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop to accommodate different box heights on a packaging line, using the fixed NBR bumper to absorb the end-of-stroke shock reliably.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this 50 mm bore if your fixture requires fine-tuning the extend position during setup. Confirm the 90 mm maximum stroke, 20 mm adjustment window, PT1/4 port, and the female M10x1.5 rod-end thread. Note that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates the stroke end and does not lock the load. For vertical load holding without live pressure, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50 mm bore cylinder features a PT1/4 air port.
The external M16x1.5 screw shortens the extend stroke by up to 20 mm, allowing on-site tuning between 70 and 90 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.