
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X90-30B is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 60 to 90 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units fail to fit. This specific SKU includes a male M18x1.5 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End-of-travel deceleration relies strictly on a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 60 and 90 mm via the M16x1.5 screw to accommodate varying fixture heights during production line changeovers without machining new spacers.
Execute light-duty pressing or alignment operations using the male M18x1.5 rod end, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach shock at the adjusted stop.
Choose this male-rod (-B) configuration for applications needing an external thread mount, and utilize the 30 mm adjustment window for rapid machine changeovers. Remember that a plain SDAJ does not hold position upon air loss or valve centering; the fixed bumper only decelerates the stroke end. For suspended or gravity-loaded applications, integrate an external rod lock or pilot-operated check valve. Confirm your PT1/4 port and 90 mm maximum stroke are adequate for the cycle.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external R (M16x1.5) screw mechanically shortens the extend end position anywhere from 90 mm down to 60 mm without affecting force. It is a hard stop, not a mid-stroke lock; the cylinder will drift if air is lost, so use a pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.