
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X90-50B is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the forward stop anywhere between 40 and 90 mm without swapping shims or parts.
The short riveted body minimizes axial mounting depth where a longer tube would not fit. This specific SKU features a male M18x1.5 piston rod end and operates on a PT1/4 air port. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, but note this unit lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod extension on the fly during packaging line changeovers to fold different box sizes precisely, saving axial space with the compact riveted body.
Choose this model if your fixture requires frequent changeovers or trial positioning within the 40-90 mm extend window.
Confirm the 90 mm maximum stroke, 50 mm adjustment window, PT1/4 port, and the male M18x1.5 rod thread suit your tooling. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston will drift, as the fixed NBR bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For suspended or vertical loads that must remain fixed during air loss, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50 mm bore cylinder operates on a PT1/4 air port.
Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, allowing on-machine tuning between 40 and 90 mm; retract remains full. This specific SKU lacks a piston magnet, so it cannot take magnetic switches—the -S variant is required for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.