Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 100 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke100 mm
- Adjustable range0–100 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100
The AirTAC SDAJ100X100-100 is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the forward stroke from 0 to 100 mm directly on the machine, avoiding part changes. The retract distance remains full. This riveted-body design saves axial mounting depth where round-body or profile units will not fit.
Force output equals a standard SDA of this bore, delivering 3927 N push at 0.5 MPa, because the adjuster sets the mechanical stop rather than altering the piston area. The unit relies on a fixed NBR bumper to decelerate the stroke end, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 100 mm |
| Adjustable range | 0 – 100 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 Is Used
Heavy Press Fitments
Dial the 0-100 mm extend stop to set precise pressing depths for large bearings without swapping shims, leveraging 3927 N of push at 0.5 MPa.
Format Changeovers
Adjust the mechanical stop on-site to accommodate different product lengths on a high-force assembly line, saving axial depth with its compact body.
Vertical Lift Stops
Set the exact raise height for a 200.2 kg lift load, using the R screw to fine-tune the upper position while relying on external checks for holding.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 the Right Cylinder?
When sizing, compare this 100 mm bore providing 3927 N push at 0.5 MPa against the smaller SDAJ80 at 2513.3 N. If your application requires on-site tuning for trial positioning or frequent format changeovers, this 0-100 mm adjustment window is highly effective. It yields a safe working load of roughly 2356 N, which translates to a vertical lift capacity of about 200.2 kg with a 2:1 margin.
Confirm the bore, 100 mm stroke, 100 mm window, PT3/8 port, and female M18x1.5 rod thread. Note this SKU lacks a piston magnet, so it cannot accept sensing switches. A plain cylinder does not hold its load on air loss or valve centring; the bumper only decelerates near the end. For secure load holding, specify an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–100 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100 FAQ
This double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum push of 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw shortens the extend stop by up to 100 mm, yielding a usable 0-100 mm range. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.