Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke15 mm
- Adjustable range5–15 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B
The AirTAC SDAJ100X15-10B is a compact double-acting single-rod cylinder featuring an external adjustable extend stop. A M27x2.0 adjuster screw lets you dial the outward stroke on-site between 5 and 15 mm without changing parts. Because the mechanism only limits the travel endpoint, output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa.
This variant features a male M26x1.5 piston rod thread and uses a PT3/8 air port. The short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the endpoint but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B Is Used
Heavy Press Fitment
Dial in the exact 5-15 mm extension for seating heavy bearings, using the full 3927 N push at 0.5 MPa to drive components home without over-traveling.
Short-Stroke Clamping
Secure large workpieces in confined machinery where the compact riveted body saves axial depth, relying on the fixed NBR bumper to absorb the clamping impact.
Stub Lift Stations
Execute brief vertical lifts up to 15 mm, safely handling around 200.2 kg with a 2:1 safety factor before retracting fully for the next cycle.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B the Right Cylinder?
When sizing this unit, evaluate both neighboring bores. Dropping down to an SDAJ80 yields 2513.3 N of push at 0.5 MPa, whereas this 100 mm bore provides 3927 N, giving a safe working load of roughly 2356 N or about a 200.2 kg vertical lift with a 2:1 margin. Choose the 100 mm option when the smaller bore lacks thrust. Confirm your required extend window falls within 5-15 mm, the PT3/8 port matches your supply, and the male M26x1.5 rod end suits your tooling.
This SKU lacks a piston magnet, so position sensing is unavailable unless you specify the -S option for reed or electronic switches. Remember that a standard cylinder drifts when air is lost or the valve centers; the fixed bumper and mechanical stop do not lock the load. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 5–15 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, and a theoretical maximum of 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw mechanically shortens the extend endpoint from the 15 mm maximum down to 5 mm without altering force. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select an -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X15-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.