
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X30-20B is a double-acting compact cylinder featuring an external M27x2.0 adjuster screw that dials the extend stop from 10 to 30 mm directly on your machine.
Its riveted body geometry minimizes axial mounting depth where larger bore units cannot fit. This specific SKU includes a male M26x1.5 piston rod end and lacks a piston magnet, meaning it cannot host reed or solid-state switches without switching to the -S variant. End-of-travel deceleration is handled solely by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 10 to 30 mm extend stop during heavy press fit changeovers to accommodate slight component height variations without machining new spacers.
Utilize the short riveted body to fit heavy-duty end-stopping logic into tight machinery frames where standard profile cylinders demand too much axial depth.
Choose this model if your setup demands heavy inline positioning combined with on-site stroke tuning.
Confirm your parameters before ordering: 100 mm bore, 30 mm maximum stroke, 20 mm adjust window, PT3/8 air port, and a male M26x1.5 rod thread. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates the stroke end and does not lock the load. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum output is 801 kgf at 1.0 MPa.
The M27x2.0 R screw shortens the extend end position by up to 20 mm, allowing you to set the stroke anywhere between 10 and 30 mm. This SKU lacks the -S magnet option, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.