Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke30 mm
- Adjustable range0–30 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30
The AirTAC SDAJ100X30-30 is a compact double-acting single-rod cylinder built for heavy-duty positioning where axial space is tight. A fixed NBR bumper decelerates the stroke end, while the external R (M27x2.0) adjuster screw lets you dial the extend stop from 0 to 30 mm directly on the machine without changing parts.
Because the adjuster sets the mechanical stop rather than the piston area, output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa. This thin riveted body fits where longer profile cylinders cannot, and the 32 mm rod handles substantial loads.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 Is Used
Press Fit Dialing
Fine-tune the 0-30 mm extend stop during heavy press operations to perfect component seating without swapping mechanical shims.
Vertical Lift Stops
Lift payloads up to 200.2 kg safely, using the external R thread to set precise downward travel limits in tight assembly cells.
Heavy Clamp Positioning
Adjust the clamping reach on the fly for varied part sizes, relying on 3927 N of thrust to secure large workpieces.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 the Right Cylinder?
When sizing heavy actuators, compare this 100 mm bore offering 3927 N push at 0.5 MPa against the neighboring SDAJ80, which yields 2513.3 N under the same pressure. Choose the 100 mm if you are moving loads near 2356 N (about 60 percent of its 0.5 MPa capacity) or lifting vertically up to 200.2 kg with a 2:1 safety margin. Step down to the 80 mm bore if your application requires less force to save mounting width.
This specific configuration features a PT3/8 port, a female M18x1.5 rod-end thread, and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S variant. Remember that the external screw is a mechanical stop, not a mid-stroke lock; a plain cylinder drifts on air loss, so deploy an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30 FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa, or 5497.8 N push and 4934.8 N pull at 0.7 MPa. The theoretical maximum push is 801 kgf at 1.0 MPa, and the air port is PT3/8.
Turning the M27x2.0 adjuster screw shortens the extend stroke by up to 30 mm, allowing usable travel between 0 and 30 mm. The screw acts only as a mechanical stop and does not lock the piston; if air pressure is lost, the cylinder will drift, so an external rod lock is required for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.