Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke30 mm
- Adjustable range0–30 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B
The AirTAC SDAJ100X30-30B is a double-acting compact cylinder featuring an external R (M27x2.0) adjuster screw that dials the extend stop from 0 to 30 mm directly on your machine. Because the mechanism sets the mechanical stop rather than altering the piston area, you retain the full thrust of a standard 100 mm bore SDA, delivering 3927 N of push force at 0.5 MPa.
This variant uses a male-threaded M26x1.5 piston rod and a PT3/8 air port. The short riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit. End shock is managed solely by a fixed NBR bumper, so for high-energy cycles you should slow the approach or add an external shock absorber.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B Is Used
Press Fit Dial-In
Set the exact 0-30 mm extend stop on the factory floor to control heavy press fits, utilizing the 3927 N push force without swapping out physical shims.
Changeover Positioning
Quickly re-adjust the male M26x1.5 rod extension during production line changeovers to accommodate varying heavy part heights.
Vertical Lift Testing
Safely test vertical lifting up to 200.2 kg with a 2:1 margin, tweaking the stroke window to find the precise engagement point before finalizing the setup.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B the Right Cylinder?
When sizing this 100 mm bore actuator, evaluate both directions: stepping down to an SDAJ80 yields 2513.3 N of push at 0.5 MPa, whereas this SDAJ100 provides 3927 N. That higher capacity translates to a safe working load of roughly 2356 N (about 60% of the 0.5 MPa figure) and a vertical lift capability near 200.2 kg with a 2:1 safety margin.
Choose this specific SKU for heavy trial positioning or frequent changeovers requiring on-site stroke tuning. Confirm your requirements for the 100 mm bore, 30 mm maximum stroke, 30 mm adjust window, PT3/8 port, male M26x1.5 rod thread, and the absence of a piston magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and does not lock the load. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–30 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B FAQ
This 100 mm bore double-acting cylinder delivers 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw mechanically shortens the extend stroke by up to 30 mm on-site without changing the thrust. This specific SKU lacks the -S code, meaning it has no piston magnet and cannot accept reed or electronic switches; you must select the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X30-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.