Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke35 mm
- Adjustable range25–35 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S
The AirTAC SDAJ100X35-10S is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the forward end-position between 25 and 35 mm directly on the machine, eliminating the need for shims or part swaps. The retract stroke remains full length. Because the adjuster only sets the mechanical stop and not the piston area, output force equals a standard SDA of this bore, delivering about 3927 N push at 0.5 MPa.
This 100 mm bore unit features a short riveted body that saves axial mounting depth where a round-body or profile cylinder will not fit. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S Is Used
Heavy Press Tuning
Dial in the 25-35 mm extend stop on heavy pressing tasks to prevent over-travel, leveraging the 3927 N push at 0.5 MPa for precise workpiece deformation.
Short-Depth Assembly Cells
Utilize the compact riveted body to save axial mounting depth in cramped assembly stations where larger profile cylinders cannot fit.
Vertical Lift Positioning
Securely lift loads up to 200.2 kg with a 2:1 safety margin, adjusting the endpoint on-site to accommodate varying stack heights.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S the Right Cylinder?
When sizing this model, consider the force boundaries: stepping down to an SDAJ80 yields 2513.3 N push at 0.5 MPa, while this 100 mm bore provides 3927 N. A computed safe working load is roughly 2356 N, equating to a vertical lift capacity of about 200.2 kg with a 2:1 margin. Choose this specific unit if your setup requires on-site stroke tuning to perfect the endpoint during commissioning. Confirm the 100 mm bore, 35 mm stroke, 10 mm adjust window, PT3/8 port, built-in magnet, and female M18x1.5 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 25–35 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S FAQ
This 100 mm bore double-acting cylinder delivers 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum push of 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stroke by up to 10 mm, allowing an on-machine range of 25 to 35 mm. The -S code provides a built-in magnet for AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.