verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.

  • BoreØ100 mm
  • Max stroke35 mm
  • Adjustable range0–35 mm
  • Adjuster threadM27×2.0
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$156.30 $163.80Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ100 stroke, mounting and version on one page All SDAJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B

The AirTAC SDAJ100X35-40B is a compact double-acting double-rod cylinder built for heavy-duty positioning where axial mounting depth is restricted. Its short riveted body saves space, while the external R (M27x2.0) adjuster screw lets you dial the extend stop down from a 35 mm maximum to zero directly on the machine. This on-site tuning removes the need for shims or part swaps during commissioning.

The bore dictates a PT3/8 port and a Ø32 mm rod. This SKU uses a male M26x1.5 rod thread (option B) and lacks a piston magnet, so it cannot host reed or electronic switches without the -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ100 mm
Max stroke35 mm
Adjustable range0 – 35 mm
Adjuster thread (R)M27×2.0
Port sizePT3/8
Acting typeDouble acting
Rod end threadM18×1.5 F / M26×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3525 N3525 N
0.7 MPa4935 N—
Max (@1.0 MPa)719 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B

SDAJCompact double-acting cylinder with adjustable stroke.
100Bore size in mm.
×35Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B Is Used

factory

Automated Welding Clamp

Use the male M26x1.5 rod thread to secure a robust clamping arm, adjusting the extend position on the fly to accommodate varying weldment thicknesses during line changeovers.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B the Right Cylinder?

Stepping down, the SDAJ80 provides 2513.3 N at the same pressure; moving up would exceed this series' capacity. Choose this specific model if your fixture requires a male M26x1.5 rod end and on-site stroke tuning within the 0 to 35 mm window.

Confirm the 100 mm bore, 35 mm stroke, 40 mm adjustment window, and PT3/8 port suit your pneumatic layout. Note that a plain SDAJ does not hold position or carry load if air pressure drops or the valve centres; the fixed NBR bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M27×2.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B FAQ

The theoretical maximum push is 801 kgf at 1.0 MPa.

The R (M27x2.0) screw shortens the extend stop by up to 40 mm, allowing you to set the usable extend stroke anywhere from 0 to 35 mm. The retract stroke remains full, and the adjuster acts purely as a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X35-40B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ100X35-40B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.