verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.

  • BoreØ100 mm
  • Max stroke40 mm
  • Adjustable range30–40 mm
  • Adjuster threadM27×2.0
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$159.34 $166.84Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ100 stroke, mounting and version on one page All SDAJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10

The AirTAC SDAJ100X40-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the forward end-position anywhere between 30 and 40 mm directly on the machine, avoiding part swaps during setup.

This 100 mm bore unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion or a mid-stroke lock. The short riveted body saves significant axial mounting depth where larger profile or round-body cylinders will not fit. Operating pressure spans 0.15 to 1.0 MPa, and the piston speed ranges from 30 to 500 mm/s.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ100 mm
Max stroke40 mm
Adjustable range30 – 40 mm
Adjuster thread (R)M27×2.0
Port sizePT3/8
Acting typeDouble acting
Rod end threadM18×1.5 F / M26×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3525 N3525 N
0.7 MPa4935 N—
Max (@1.0 MPa)719 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10

SDAJCompact double-acting cylinder with adjustable stroke.
100Bore size in mm.
×40Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10 Is Used

precision_manufacturing

Heavy Press Tuning

Dial the exact 30-40 mm extend stop on heavy stamping fixtures to compensate for material thickness variations without changing shims.

factory

Compact Clamp Setup

Fit the short riveted body into cramped machining cells and adjust the clamping reach on-site to secure oversized workpieces.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10 the Right Cylinder?

Choose this specific model if your fixture requires on-site stroke tuning within the 30-40 mm window.

Confirm the 100 mm bore, 40 mm maximum stroke, 10 mm adjust window, PT3/8 port, and female M18x1.5 rod-end thread suit your mounting plate. Note that this SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Furthermore, a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M27×2.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10 FAQ

Turning the external R (M27x2.0) screw mechanically shortens the extend end-position from the 40 mm maximum down to 30 mm. This sets the physical stop and does not alter the output force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X40-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ100X40-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.