
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X45-10S is a compact double-acting double-rod cylinder engineered for heavy-duty positioning where axial mounting depth is restricted. Its riveted body saves space compared to conventional round-body units, while the external R (M27x2.0) adjuster screw lets you dial the extend end-position anywhere between 35 and 45 mm directly on the machine.
This 100 mm bore variant features a 32 mm piston rod, a PT3/8 air port, and a built-in piston magnet (-S) for AirTAC reed or electronic switches. End-of-travel shock is managed by a fixed NBR bumper that decelerates the load, not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 35-45 mm extend stop to set precise insertion depths for heavy bearing press operations without swapping mechanical shims.
Quickly reposition the 3927 N extend stop across a 10 mm window when shifting a production line between multi-part product families.
When sizing this unit, verify if the 100 mm bore provides the optimal thrust or if neighbouring bores better match the load. Stepping up is impossible as this is the largest standard SDAJ bore, so for loads exceeding the 801 kgf maximum at 1.0 MPa, a larger non-compact format is required.
Choose this specific configuration if your fixture requires frequent on-machine stroke tuning across a 10 mm window during changeovers. Confirm the 45 mm maximum stroke, 10 mm adjustability, PT3/8 port, and the female M18x1.5 rod-end thread suit your mounting plate. Because the -S magnet is present, you can fit reed or solid-state sensors into the body grooves. Remember that a plain cylinder does not hold position on air loss; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stroke by up to 10 mm, yielding a usable 35-45 mm range while retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.