
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X45-20B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. A M27x2.0 adjuster screw lets you dial the forward stroke down from the 45 mm maximum to as low as 25 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
This model uses a short riveted body to save axial mounting depth in tight setups, which is critical when scaling up to a 32 mm rod and a PT3/8 port. It includes a fixed NBR bumper at each end to decelerate the stroke, but this is not an adjustable air cushion. Equipped with the -B option, the piston rod features a male M26x1.5 thread for secure external mounting.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the insertion depth of bearings or pins on the production floor by turning the M27x2.0 stop screw, accommodating part tolerances on the fly.
Set precise lifting heights for 200 kg material trays; remember to add an external pilot-operated check valve, as the bumper decelerates but does not lock the load.
When sizing this 100 mm bore actuator, evaluate your force needs both ways.
This SKU is ideal for operators needing on-site reach tuning between 25 and 45 mm. Note that a plain cylinder does not hold its load upon air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end of the stroke. For suspended or vertical loads, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the 100 mm bore, 45 mm stroke, 20 mm window, PT3/8 port, male M26x1.5 rod thread, and the absence of a piston magnet.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 801 kgf at 1.0 MPa.
The external M27x2.0 screw mechanically shortens the forward stroke from the 45 mm maximum down to 25 mm without changing the force output. This specific SKU lacks a piston magnet, so it cannot take magnetic switches; you would need the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.