
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-40 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X45-40 is a double-acting compact cylinder featuring an external M27x2.0 adjuster screw that dials the extend stop from 5 to 45 mm directly on your machine.
Its short riveted body significantly reduces axial mounting depth compared to conventional round-body units, a crucial benefit when installing a 100 mm bore actuator in tight machinery frames. The extend stop relies on a fixed NBR bumper to absorb end-of-travel shock, meaning it is not an adjustable air cushion or a mid-stroke braking device. Operating at speeds of 30-500 mm/s, this specific SKU lacks a piston magnet and therefore cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X45-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 5-45 mm extend stop during press tooling setups to apply 3927 N of forming force without replacing hard shims.
Fit the short 100 mm bore body into tight automated machinery footprints where axial depth is restricted but high push force is mandatory.
When sizing this 100 mm bore actuator, evaluate your force requirements bidirectionally. Always verify your bore, 45 mm stroke, 40 mm adjustment window, PT3/8 port, and the absence of the -S magnet for sensing.
Engineers requiring on-site stroke tuning for frequent product changeovers will benefit from the 5-45 mm extend range. Note that a plain compact cylinder does not hold position or load upon air loss or valve centering; the fixed NBR bumper only decelerates the stroke end. For suspended or gravity-loaded applications, integrate an external rod lock or a pilot-operated check valve to secure the load safely.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
Turning the M27x2.0 external screw shortens the extend stroke by up to 40 mm, allowing you to set the end position anywhere between 5 and 45 mm. This SKU lacks a piston magnet, so reed or electronic switches require the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.