Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke5 mm
- Adjustable range0–5 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B
The AirTAC SDAJ100X5-10B is a double-acting compact cylinder featuring a 100 mm bore and a male-threaded piston rod (M26x1.5). A short riveted body saves axial mounting depth where a round-body cylinder will not fit. The external R (M27x2.0) adjuster screw lets you dial the extend stop on-site between 0 and 5 mm without shims or part changes.
Force remains identical to a standard SDA of this bore, delivering 3927 N push at 0.5 MPa, because the adjuster sets the mechanical stop rather than altering the piston area. End shock is handled solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. This unit lacks a piston magnet, so it cannot accept magnetic switches.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B Is Used
Heavy Press Fit Tuning
Dial in the exact 0-5 mm extend position during heavy press fit commissioning to prevent over-travel, utilizing the full 3927 N push at 0.5 MPa.
Short-Stroke Clamping
Secure large automotive castings in tight axial spaces where the short riveted body saves depth, relying on the male M26x1.5 rod for robust tool mounting.
Vertical Lift Stops
Lift loads up to 200.2 kg with a 2:1 margin and fine-tune the extend stop on the machine, avoiding the need to swap shims during product changeover.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B the Right Cylinder?
When sizing, compare this 100 mm bore offering 3927 N push at 0.5 MPa against the neighboring SDAJ80, which provides 2513.3 N at the same pressure. If your application requires less force, step down to the 80 mm version; if you need maximum thrust in a compact footprint, this 100 mm bore is the largest standard option. The computed safe working load is approximately 2356 N, representing about 60 percent of the 0.5 MPa push figure, and it can manage a vertical lift of roughly 200.2 kg with a 2:1 safety margin.
This specific SKU is ideal for operators who need precise on-site stroke tuning for initial setup or changeover. It includes the -B option for a male M26x1.5 rod end and uses a PT3/8 air port. Remember that a plain cylinder does not hold its load on air loss or when a valve is centered; the piston drifts and the fixed bumper only decelerates near the stroke end. For a held load without live pressure, utilize an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–5 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B FAQ
This 100 mm bore cylinder uses a PT3/8 air port. It generates 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop by up to 10 mm, providing a usable extend range of 0 to 5 mm. The screw sets the mechanical stop position without changing the force, and the retract stroke remains full length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X5-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.