
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X50-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X50-20B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you shorten the forward stroke on-site across a 30 to 50 mm window without swapping shims or components.
This variant features a male M26x1.5 piston rod thread and a PT3/8 air port. The short riveted body minimizes axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so magnetic sensing is unsupported.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X50-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site for different product families on a shared line, avoiding part changes while maintaining robust clamping pressure.
Set precise lower endpoints for heavy vertical lifts.
When sizing this unit, evaluate both neighboring bores. If your application requires extreme force, stepping up to a larger custom bore is necessary, as 100 mm is the largest standard SDAJ offering. Choose this specific model when your machinery requires heavy push force combined with on-site extend length tuning between 30 and 50 mm.
Confirm the 50 mm maximum stroke, 20 mm adjust window, PT3/8 port, and the male M26x1.5 rod thread for your mounting interface. Operating speed spans 30-500 mm/s. A plain SDAJ does not hold a load if air pressure drops or the valve centers; the piston drifts. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the fixed NBR bumper only decelerates near the end of travel and provides no locking function.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
The R (M27x2.0) screw mechanically limits the extend stroke, allowing you to set the forward end position anywhere between 30 and 50 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S option code for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.