
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X50-30 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X50-30 is a double-acting compact cylinder featuring a 100mm bore and an external adjustable extend stop. A built-in M27x2.0 screw lets you dial the forward stroke down from the 50mm maximum to as low as 20mm directly on the machine, eliminating the need for shims or part swaps during setup.
Designed to save axial mounting depth, the short riveted body fits where larger profile cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber. This specific SKU lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X50-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 20 and 50mm on the fly to accommodate different material thicknesses in a forming press without swapping out mechanical spacers.
Choosing this 100mm bore provides massive thrust in a compact footprint, pushing 3927 N at 0.5 MPa. If your application requires less force, sizing down to the SDAJ80 yields 2513.3 N at 0.5 MPa, representing the nearest lower boundary. Since this is the largest standard bore in the series, there is no larger option available. The 50mm stroke combined with the 30mm adjustment window allows the rod to lock into any forward position between 20 and 50mm, making it highly effective for trial positioning and heavy changeovers.
Keep in mind that a plain SDAJ does not hold a load if air pressure drops or the valve is centered; the piston will drift. For vertical or suspended loads requiring safety holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your build needs the PT3/8 air port, the female M18x1.5 rod-end thread, and the absence of a magnet before ordering.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 801 kgf at 1.0 MPa.
The external M27x2.0 screw acts as a mechanical stop that shortens the extend stroke by up to 30mm. You can set the forward end position anywhere between 20mm and the full 50mm stroke. This adjustment changes the stopping point only, not the cylinder's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.