
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X55-30B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you dial the outward stroke on-site between 25 and 55 mm without changing parts.
This 100 mm bore unit utilizes a short riveted body to minimize axial mounting depth where larger profile cylinders cannot fit. It comes with a male-thread M26x1.5 piston rod and a PT3/8 air port. End shock is managed by a fixed NBR bumper that decelerates the stroke end, but note this is not an adjustable air cushion. This specific SKU lacks a piston magnet, so magnetic sensing is not supported.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the outward stroke on assembly lines during product family shifts, relying on the M27x2.0 adjuster screw for exact endpoint tuning.
Choose this unit when your fixture requires precise on-machine stroke tuning during commissioning or tooling changeovers.
Confirm the 100 mm bore, 55 mm maximum stroke, and 30 mm adjust window match your spatial envelope. This variant includes a male M26x1.5 rod thread and no magnet. Remember that a plain cylinder does not hold position upon air loss or valve centering; the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa.
The external R (M27x2.0) screw mechanically limits the extend stroke, allowing you to set the outward endpoint anywhere between 25 and 55 mm. It acts as a hard stop and does not alter the cylinder's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.