
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-40 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X55-40 is a double-acting compact cylinder featuring a 100 mm bore and an external adjustable extend stop. A simple turn of the R (M27x2.0) screw lets you dial the outward stroke anywhere between 15 and 55 mm directly on the machine, eliminating the need for shims or part swaps during setup.
Built with a short riveted body, this unit saves valuable axial mounting depth in tight machinery envelopes where larger profile or round-body cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly turn the R (M27x2.0) screw to accommodate different part heights during production runs, saving axial space with the compact riveted body.
This model is ideal for operators who need on-site stroke tuning for changeovers or trial positioning. Keep in mind that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve is centered; the fixed bumper only decelerates the stroke end. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the 100 mm bore, 55 mm maximum stroke, 40 mm adjust window, PT3/8 port, female M18x1.5 rod thread, and the absence of a magnet.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The external R (M27x2.0) screw mechanically shortens the extend stroke by up to 40 mm, allowing you to set the outward stop anywhere between 15 and 55 mm without changing parts. The retract stroke remains full. This screw is only a mechanical stop, not a mid-stroke lock; the cylinder will drift if air is lost, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.