
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-40B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X55-40B is a double-acting compact cylinder featuring a male-thread M26x1.5 piston rod and an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the forward end-position anywhere between 15 and 55 mm directly on the machine, eliminating the need for shims or part swaps.
Built with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It handles operating pressures from 0.15 to 1.0 MPa and speeds of 30-500 mm/s. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the stop screw is a positioning tool and never a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly turn the R screw during changeover to accommodate different blank heights, leveraging the full 801 kgf max thrust for deep drawing operations.
Choose this specific SKU if your fixture requires on-site stroke tuning during commissioning or frequent changeovers. Confirm your setup needs the male M26x1.5 rod thread, the PT3/8 air port, and the 40 mm adjustment window. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
This 100 mm bore cylinder uses a PT3/8 air port.
The external M27x2.0 screw mechanically shortens the forward stroke by up to 40 mm, allowing you to set the extend position anywhere from 15 mm to the full 55 mm. This specific SKU lacks a piston magnet, so it cannot take a magnetic switch; you would need the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.