
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-50 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X55-50 is a double-acting double-rod compact cylinder featuring an external adjustable extend stop. A M27x2.0 adjuster screw lets you dial the outward stroke on-site between 5 and 55 mm without changing parts.
This model utilizes a short riveted body to minimize axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X55-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 55 mm |
| Adjustable range | 5 – 55 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward stroke quickly on assembly lines handling multiple product variants, relying on the fixed NBR bumper to absorb the high kinetic energy of the 32 mm rod.
Set exact lifting heights for 200.2 kg vertical loads using the M27x2.0 adjuster, ensuring positive mechanical stops while maintaining a two-to-one safety margin.
It also handles a vertical lift of approximately 200.2 kg when applying a two-to-one safety margin.
Operators needing frequent on-machine stroke tuning during changeovers will benefit from the 50 mm adjustment window. Remember that a plain cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT3/8 port, female M18x1.5 rod thread, and the absence of a magnet.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push force is 801 kgf at 1.0 MPa.
Turning the external M27x2.0 screw shortens the extend stop by up to 50 mm, allowing the outward stroke to be set anywhere between 5 and 55 mm. The retract stroke remains full, and the adjuster acts purely as a mechanical stop without altering the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.