Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke60 mm
- Adjustable range50–60 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S
The AirTAC SDAJ100X60-10S is a double-acting, single-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the forward stroke down from its 60 mm maximum to 50 mm directly on the machine, eliminating the need for shims or part swaps during setup. Because the adjuster only sets the mechanical stop position, the output force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa.
This 100 mm bore actuator utilizes a short riveted body to save axial mounting depth in tight machinery spaces. It comes with a built-in piston magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. The bumper is not an adjustable air cushion, so for high-energy cycles you should slow the approach or add external shock absorption.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S Is Used
Heavy Press Tuning
Dial in the exact 50-60 mm extend stop on a heavy press fixture without disassembling the tooling, leveraging the 3927 N push force to seat rigid components.
Mold Changeover
Quickly adjust the mechanical stop position during product changeovers on a 100 mm bore line, saving axial depth while maintaining full clamping power.
Vertical Lift Damping
Lift loads up to 200.2 kg with a 2:1 safety margin, using the fixed NBR bumper to decelerate the extend stroke while fine-tuning the final drop distance.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S the Right Cylinder?
When sizing this actuator, consider the force boundaries of neighboring bores. The SDAJ100 provides 3927 N push at 0.5 MPa, whereas the smaller SDAJ80 offers 2513.3 N. If your application requires a safe working load around 2356 N (about 60% of the 0.5 MPa figure) or a vertical lift of roughly 200.2 kg with a 2:1 margin, this 100 mm option provides the necessary capacity without stepping up to a larger footprint. It is ideal for operators who need on-site stroke tuning to perfect a 50-60 mm extend position.
Confirm the bore (100 mm), stroke (60 mm), adjustment window (10 mm), and PT3/8 air port match your pneumatic layout. This variant includes the -S magnet for electronic or reed sensing, and uses a female M18x1.5 rod-end thread. Note that a plain compact cylinder does not hold a load when air is lost or the valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 50–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S FAQ
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.9 N pull at 0.5 MPa. At 0.7 MPa, it outputs 5497.8 N push and 4934.8 N pull. The theoretical maximum push force is 801 kgf at 1.0 MPa.
The M27x2.0 adjuster screw shortens the extend stop by up to 10 mm, giving a usable forward range of 50-60 mm. The included -S magnet allows you to track piston position using AirTAC reed or electronic solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.