
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X60-30 is a compact double-acting double-rod cylinder engineered to deliver substantial force in tight mounting envelopes. A short riveted body saves axial depth where larger profile units fail to fit. It features an external M27x2.0 adjuster screw that lets you dial the extend stop down from 60 mm to 30 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
The cylinder relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X60-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly reconfigure the mechanical end-stop during product changeovers, using the M27x2.0 screw to set exact forming depths on the fly.
When sizing this unit, evaluate your force requirements bidirectionally. Choose this specific model if your fixture demands on-site stroke tuning to achieve precise end positions during changeovers.
Confirm the bore 100 mm, stroke 60 mm, and 30 mm adjustment window fit your spatial constraints, noting the PT3/8 port and female M18x1.5 rod-end thread. This SKU lacks a piston magnet, so position sensing is unavailable without the -S variant. Remember that a plain cylinder does not hold a load on air loss; the fixed bumper only decelerates near the end. For vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa.
Turning the external R (M27x2.0) screw shortens the extend stroke anywhere between 30 mm and 60 mm without changing the force. End deceleration relies on a fixed NBR bumper, not an adjustable air cushion. This unit has no magnet, so it cannot use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.