verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.

  • BoreØ100 mm
  • Max stroke65 mm
  • Adjustable range45–65 mm
  • Adjuster threadM27×2.0
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$176.30 $183.80Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ100 stroke, mounting and version on one page All SDAJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B

The AirTAC SDAJ100X65-20B is a double-acting compact cylinder featuring an external R (M27x2.0) adjuster screw that dials the extend stop between 45 and 65 mm on-site. This SKU uses a male-threaded M26x1.5 piston rod and a PT3/8 air port.

Designed with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Note that this specific model lacks a piston magnet, so it cannot accept reed or electronic switches without switching to the -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ100 mm
Max stroke65 mm
Adjustable range45 – 65 mm
Adjuster thread (R)M27×2.0
Port sizePT3/8
Acting typeDouble acting
Rod end threadM18×1.5 F / M26×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3525 N3525 N
0.7 MPa4935 N—
Max (@1.0 MPa)719 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B

SDAJCompact double-acting cylinder with adjustable stroke.
100Bore size in mm.
×65Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B Is Used

factory

Automated Assembly Forming

Fine-tune the male M26x1.5 rod extension during automated assembly line changeovers, using the fixed NBR bumper to absorb the impact of high-energy forming strokes.

vertical_align_center

Vertical Lift Positioning

Adjust the extend stop on-site for vertical lifting tasks up to 200.2 kg, ensuring exact placement while relying on a pilot-operated check valve to hold the load safely.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B the Right Cylinder?

When sizing this 100 mm bore actuator, evaluate both sides with real 0.5 MPa push figures. Since 100 mm is the largest standard compact bore in this family, heavier loads require parallel cylinders or an external shock absorber. This model fits applications requiring on-site stroke tuning during changeovers, allowing the extend position to be fine-tuned without shims or part swaps.

Confirm the bore (100 mm), nominal stroke (65 mm), 20 mm adjustment window, PT3/8 port, and male M26x1.5 rod thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M27×2.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B FAQ

The air port is PT3/8.

Turning the external M27x2.0 R screw shortens the extend stroke by up to 20 mm, providing a usable range of 45 to 65 mm without changing parts. This specific SKU lacks the -S magnet option, so it cannot support reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ100X65-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.