
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X70-10B is a double-acting compact cylinder featuring an external M27x2.0 adjustment screw that dials the extend stop between 60 and 70 mm. By turning this R thread, you fine-tune the end position directly on the machine without swapping parts.
This 100 mm bore unit saves axial mounting depth through its short riveted body, fitting where round-body alternatives cannot. It carries a fixed NBR bumper at each end to decelerate the stroke, rather than an adjustable air cushion. This specific SKU uses a male M26x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M26x1.5 rod end position on the fly during product changeovers, saving axial depth in tight automated cells with the compact riveted body.
The 10 mm adjustment window is ideal for setups requiring precise trial positioning during commissioning.
Operators needing on-site stroke tuning without shims will benefit from this design. Remember that a plain cylinder does not hold its load on air loss or valve centering; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, stroke, window, PT3/8 port, and male M26x1.5 rod thread before ordering.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 801 kgf at 1.0 MPa.
The external M27x2.0 screw mechanically shortens the extend stroke by up to 10 mm, allowing an end position anywhere between 60 and 70 mm. It sets the stop without altering force, and because this SKU lacks the -S magnet, it cannot accept position switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.