
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X70-20B is a compact double-acting double-rod cylinder built with a short riveted body to minimize axial mounting depth in tight machinery layouts. An external R (M27x2.0) adjuster screw lets you dial the extend stop down by 20 mm on the machine, yielding a usable extend range of 50 to 70 mm without swapping shims or parts. Retract travel remains full length.
End shock is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU features a male M26x1.5 piston rod thread and lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Accommodate varying workpiece heights on a machining line by turning the R screw, securely clamping parts with the male M26x1.5 rod end.
Choose the 100 mm if the 80 mm lacks thrust, but avoid oversizing if 2513.3 N suffices, as the larger body consumes more radial space. This configuration includes a 70 mm stroke, a 20 mm adjust window, a PT3/8 port, and a male M26x1.5 rod thread.
Operators needing frequent on-site stroke tuning during changeovers will benefit from the external screw. Remember that a plain cylinder does not hold its load on air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push is 5497.8 N and pull is 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
The external M27x2.0 screw shortens the extend stroke by up to 20 mm, allowing on-site adjustment between 50 and 70 mm. This SKU has no piston magnet (-S omitted), so it cannot accept reed or electronic switches; order the -S variant if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.