Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke70 mm
- Adjustable range30–70 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S
The AirTAC SDAJ100X70-40S is a double-acting compact cylinder featuring an external extend stop. Turning the R (M27x2.0) screw lets you dial the forward stroke from 30 to 70 mm directly on the machine, avoiding part swaps during changeovers. Retract remains full length.
The adjuster sets the stop position rather than the piston area, so output matches a standard SDA of this bore at 3927 N push at 0.5 MPa. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. A fixed NBR bumper decelerates the stroke end, and the built-in magnet supports reed or electronic switches.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S Is Used
Press Fit Dialing
Turn the M27x2.0 screw to set the 30-70 mm extend stop for pressing bearings without swapping shims on the line.
Heavy Vertical Lift
Lift up to 200.2 kg with a 2:1 safety margin, using the 3927 N push force to elevate heavy assemblies.
Short-Depth Forming
Fit the compact riveted body into tight machine frames to deliver 801 kgf max push for localized forming tasks.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S the Right Cylinder?
This 100 mm bore delivers 3927 N push at 0.5 MPa. If your setup is lighter, the SDAJ80 drops to 2513.3 N, representing the next step down. Since 100 mm is the largest in the family, moving up requires a different series. The fixed bumper only decelerates near the end; a plain cylinder does not hold a load on air loss, so add an external rod lock or pilot-operated check valve for vertical holding.
Choose this model when you need heavy push force plus on-site stroke tuning. It carries a 40 mm adjustment window, a PT3/8 port, and a 32 mm rod. The -S code confirms the internal magnet for sensing, and the rod end has female M18x1.5 threads.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 30–70 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw shortens the extend stop by up to 40 mm, giving a usable 30-70 mm forward range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.