
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X70-50 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. An M27x2.0 adjuster screw lets you dial the outward stroke anywhere between 20 and 70 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, while the mechanical stop sets the position without altering the pneumatic force.
End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 20-70 mm extend stop on the fly to set precise contact pressure for heavy pressing operations without changing machine hardware.
When sizing this model, evaluate your force requirements both ways. Choose the 100 mm bore when you need maximum thrust within a compact footprint.
This cylinder is ideal for setups requiring frequent on-site stroke tuning between 20 and 70 mm. Confirm your port size is PT3/8 and your rod-end thread is female M18x1.5 (or male M26x1.5 if specified). Because a plain cylinder drifts when air is lost or the valve is centered, integrate an external rod lock or pilot-operated check valve if your application requires load holding.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The M27x2.0 adjuster screw mechanically shortens the extend stroke by up to 50 mm, allowing you to set the outward stop anywhere between 20 and 70 mm. It acts only as a physical stop and does not alter the cylinder's pneumatic force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.