Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke70 mm
- Adjustable range20–70 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B
The SDAJ100X70-50B is a double-acting compact riveted-body cylinder featuring an external extend stop. Turning the R (M27x2.0) adjuster screw lets you dial the outward stroke down from 70 mm to 20 mm directly on the machine, eliminating the need for shims or part swaps. Output matches a standard SDA of this bore, delivering 3927 N of push force at 0.5 MPa.
This 100 mm bore unit uses a PT3/8 port and a male M26x1.5 piston rod. Its short body profile saves axial mounting depth where larger profile or round-body units will not fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel rather than acting as an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B Is Used
Heavy Press Fitments
Dial the 20-70 mm extend stop during initial tooling commissioning to find the exact contact point for high-force press operations without changing parts.
Automated Welding Fixtures
Use the male M26x1.5 rod to secure heavy clamps, relying on the 3927 N push at 0.5 MPa to hold steel assemblies firmly in place.
Material Lift Stations
Lift loads up to 200.2 kg vertically with a 2:1 safety margin, adjusting the outward stroke on the fly to accommodate varying pallet thicknesses.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B the Right Cylinder?
Choosing this 100 mm bore provides 3927 N push at 0.5 MPa, yielding a safe working load of roughly 2356 N (about 60 percent of capacity) and a vertical lift capability near 200.2 kg with a 2:1 margin. If your application requires less force, sizing down to the SDAJ80 gives 2513.3 N push at 0.5 MPa. Since 100 mm is the largest standard SDA bore, moving beyond this capacity requires a different cylinder family.
Operators needing on-site stroke tuning for trial positioning will benefit from the 20-70 mm adjustable window. This SKU includes the -B option for a male-threaded M26x1.5 rod, but lacks the -S magnet, meaning it cannot host reed or electronic switches. Note that a plain cylinder does not hold position on air loss; the fixed bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for load holding.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 20–70 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B FAQ
This 100 mm bore double-acting cylinder uses a PT3/8 port. It generates 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
The R (M27x2.0) screw mechanically shortens the extend stop from the 70 mm maximum down to 20 mm without altering the 3927 N force. The -B code denotes the male M26x1.5 piston rod thread. This unit has no magnet, so it cannot support switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-50B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.