Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke75 mm
- Adjustable range65–75 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10
The AirTAC SDAJ100X75-10 is a double-acting compact cylinder featuring an external R (M27x2.0) adjuster screw that lets you dial the extend stop precisely between 65 and 75 mm directly on your machine. Because the adjuster sets the mechanical stop rather than altering the piston area, you retain the full standard SDA thrust of 3927 N push at 0.5 MPa. This SKU ships without a piston magnet, so it cannot host reed or electronic switches unless you specify the -S variant.
Its short riveted body drastically reduces axial mounting depth where a larger profile unit will not fit. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the impact; it is not an adjustable air cushion. For high kinetic energy approaches, consider slowing the piston or adding an external shock absorber.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 Is Used
Heavy Press Setup
Dial in the 65-75 mm extend stop during initial tooling commissioning to set precise forming depth without machining new spacers.
Large Fixture Clamping
Apply the 3927 N push at 0.5 MPa to secure heavy castings, using the adjuster to accommodate varying part tolerances on the fly.
Vertical Lift Stops
Lift loads up to roughly 200.2 kg with a 2:1 safety margin, tweaking the R screw to set exact upper travel limits without part changes.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 the Right Cylinder?
When sizing this 100 mm bore, evaluate your neighbours: stepping down to SDAJ80 yields 2513.3 N push at 0.5 MPa, while this SDAJ100 provides 3927 N. The 10 mm adjustment window is ideal for final trial positioning during heavy setup changeovers. Confirm your requirements for bore, stroke, window, PT3/8 port, and the female M18x1.5 rod thread.
A plain actuator cannot hold a load if air pressure drops or the valve centres—the piston will drift. The fixed bumper only decelerates near the end of travel and the R screw is a stop, not a mid-stroke lock. To suspend a vertical load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 65–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10 FAQ
At 0.5 MPa this 100 mm bore delivers 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
Turning the M27x2.0 adjuster screw shortens the extend end-position by up to 10 mm, giving a usable range of 65 to 75 mm. It functions purely as a mechanical stop and does not alter the cylinder's force output.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.