
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-20S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The SDAJ100X75-20S is a double-acting compact cylinder featuring a 100 mm bore and an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. Turning the R (M27x2.0) screw lets you dial the extend end-position anywhere between 55 and 75 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body drastically reduces axial mounting depth compared to conventional round-body units, fitting into tight machinery footprints. End-of-stroke impact is managed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on the fly during production line changeovers to accommodate different part heights, saving axial space with its compact riveted body.
When sizing this bore, evaluate your force requirements bidirectionally.
Choose this model if your application requires frequent on-site stroke tuning between 55 and 75 mm. Confirm your setup requires a PT3/8 air port, a 32 mm piston rod, and the built-in magnet (-S). Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper and mechanical stop do not lock the load. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum thrust is 801 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The external R (M27x2.0) screw mechanically shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere between 55 and 75 mm. This adjustment changes only the stop position, not the output force. The built-in -S magnet works independently with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.