
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-30S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X75-30S is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the extend stroke down from 75 mm to 45 mm directly on the machine, avoiding part swaps during setup.
The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly reconfigure end positions for different product runs by turning the M27x2.0 adjuster, saving axial space with the compact riveted body in tight cell layouts.
Choose the 100 mm bore when you need that specific heavy payload and the 45-75 mm on-site extend tuning window.
Confirm the PT3/8 port, the 32 mm rod with female M18x1.5 thread, and the -S magnet for your sensing needs. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the bumper only decelerates near the end of travel. For suspended or vertical loads, add an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The external stop screw does not alter these force values.
The M27x2.0 R screw shortens the extend stroke by up to 30 mm, giving a usable 45-75 mm range while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing, though the mechanical stop itself does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.