Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke80 mm
- Adjustable range0–80 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S
The AirTAC SDAJ100X80-100S is a double-acting, single-rod compact cylinder featuring an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. The short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit.
Equipped with an M27x2.0 adjuster screw, the extend stroke can be dialed down on-site from 80 mm to any intermediate point down to 0 mm without changing parts. The stop sets the end position only; force remains identical to a standard SDA of this bore, delivering 3927 N of push at 0.5 MPa. A fixed NBR bumper decelerates the stroke end, operating effectively across a 30-500 mm/s speed range.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 80 mm |
| Adjustable range | 0 – 80 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S Is Used
Heavy Press Fitments
Dial the M27x2.0 screw to set exact 0-80 mm extend depths during heavy press changeovers without swapping actuators.
Assembly Line Tooling
Leverage the 3927 N push at 0.5 MPa to seat dense components, using the fixed NBR bumper to absorb end-of-stroke shock.
Vertical Lift Stations
Lift loads up to 200.2 kg with a 2:1 margin, relying on the compact riveted body to minimize vertical headroom requirements.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S the Right Cylinder?
When sizing this 100 mm bore actuator, evaluate your neighbors: the SDAJ80 provides 2513.3 N push at 0.5 MPa, whereas this SDAJ100 yields 3927 N. This makes the 100 mm bore the correct step-up when the 80 mm falls short of your force requirements. The computed safe working load is roughly 2356 N (about 60 percent of the 0.5 MPa figure), allowing a vertical lift of approximately 200.2 kg with a 2:1 safety margin.
This model includes the -S magnet for electronic or reed sensors and features a PT3/8 port. Confirm your required extend window: the 100 mm adjustment range allows maximum flexibility for trial positioning. Note that a plain compact cylinder does not hold position upon air loss; for suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–80 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S FAQ
This 100 mm bore cylinder delivers 3927 N push and 3524.9 N pull at 0.5 MPa, 5497.8 N push and 4934.8 N pull at 0.7 MPa, with a theoretical maximum of 801 kgf at 1.0 MPa.
The M27x2.0 screw shortens the extend stop by up to 100 mm, yielding a usable 0-80 mm extend range. The included -S magnet works with AirTAC reed or solid-state electronic switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.