
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-30S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X80-30S is a compact double-acting double-rod cylinder featuring an external extend stop. A M27x2.0 adjuster screw lets you dial the outward stroke from 50 to 80 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. It includes a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. The bore dictates a PT3/8 air port and a 32 mm piston rod.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 50-80 mm extend stop during initial tooling commissioning to set precise forming depth without machining custom spacers.
Adjust the outward stroke to accommodate different pallet thicknesses, ensuring accurate vertical placement on packaging lines.
Operators who require frequent trial positioning or rapid format changes will benefit from the 30 mm external adjustment window. Keep in mind the fixed NBR bumper only decelerates near the stroke end; for high energy cycles you should add an external shock absorber.
This configuration features a 100 mm bore, 80 mm maximum stroke, a 30 mm adjustment window, a PT3/8 port, and a female M18x1.5 rod-end thread. The -S code indicates the magnet is present for switch integration. A plain cylinder does not hold its load on air loss or when the valve is centred; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa.
The -S code means a built-in magnet is included for direct mounting of AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.