
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-50B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X80-50B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the extend position anywhere between 30 and 80 mm directly on the machine without shims or part changes.
This model uses a short riveted body to minimize axial mounting depth where larger profile cylinders cannot fit. It features a male M26x1.5 piston rod thread, a PT3/8 air port, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; select the -S variant if sensing is required.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X80-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 30 and 80 mm to accommodate varying casting widths on a machining line without fabricating custom spacers.
Choose the 100 mm bore when moving heavy platens or fixtures that exceed the 80 mm capacity.
This configuration includes an 80 mm maximum stroke with a 50 mm adjustment window, a PT3/8 port, and a male M26x1.5 rod thread (option B). It is perfect for setups requiring frequent on-machine stroke tuning during changeovers. Remember that a plain cylinder does not hold position on air loss or valve centre; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The M27x2.0 adjuster screw mechanically shortens the extend stroke from the 80 mm maximum down to 30 mm. It acts only as a stop and does not lock the piston mid-stroke; a pilot-operated check valve is required to hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.