
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X85-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you can dial the forward stroke down by 10 mm on-site, setting the usable extension anywhere between 75 and 85 mm without swapping shims or parts.
Designed to save axial mounting depth where round-body or profile cylinders will not fit, this riveted-body unit accepts standard AirTAC compact-cylinder accessories. The included -S piston magnet supports position sensing via reed or electronic switches mounted in the body grooves. End shock is managed by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 75-85 mm extend stop on-site to set exact forming depth on heavy stamping presses without machining new spacers.
Adjust the 10 mm window to perfect the fold angle on oversized corrugated boxes during rapid format changeovers.
When sizing this 100 mm bore actuator, evaluate both neighbors. At the upper edge of the range, this is the largest standard compact option.
Choose this specific model if your machine build requires on-site stroke tuning to perfect a 75-85 mm extend position. Confirm the bore (100 mm), nominal stroke (85 mm), adjustment window (10 mm), and PT3/8 port. The -S code indicates the built-in magnet for reed or electronic sensing, and the rod end features a female M18x1.5 thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; for vertical loads, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M27x2.0 screw shortens the extend end-position by up to 10 mm, giving a usable forward stroke of 75 to 85 mm. The built-in -S magnet works with AirTAC reed or electronic switches for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.