
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-20B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X85-20B is a double-acting compact cylinder featuring an external adjustable extend stop. A M27x2.0 adjuster screw lets you dial the forward end-position anywhere between 65 and 85 mm directly on the machine, eliminating the need for shims or part swaps.
This model uses a short riveted body to save axial mounting depth where a larger profile cylinder will not fit. It includes a male M26x1.5 piston rod thread (option B) and a fixed NBR bumper at each end to absorb end-of-stroke shock. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-85 mm extend stop on a heavy stamping press to accommodate varying material thicknesses without changing out hard stops.
When sizing this 100 mm bore actuator, evaluate your force requirements both ways. If your application demands extreme force beyond the theoretical 801 kgf maximum at 1.0 MPa, you would need to look outside the compact SDA family. This cylinder is ideal for operators who need on-machine stroke tuning during frequent changeovers. Confirm your requirements for a 100 mm bore, 85 mm maximum stroke, 20 mm adjust window, PT3/8 port, and the male M26x1.5 rod thread.
Keep in mind that a plain SDAJ does not hold position or carry load if air pressure drops or the valve is centered. The fixed NBR bumper only decelerates the stroke near its end; it is not a lock or brake. For vertical or suspended loads requiring safety holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push force is 801 kgf at 1.0 MPa.
The external M27x2.0 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 85 mm maximum down to 65 mm. It does not alter the cylinder's force output, and the retract stroke remains full length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.