
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-40B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X85-40B is a double-acting compact cylinder featuring an external adjustable extend stop. An M27x2.0 adjuster screw lets you dial the forward stroke down by up to 40 mm, yielding a usable range of 45 to 85 mm directly on your machinery.
This 100 mm bore unit utilizes a short riveted body to minimize axial mounting depth where larger profile cylinders cannot fit. It comes equipped with a male M26x1.5 piston rod thread and a PT3/8 air port. Deceleration at the end of travel is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reconfigure the mechanical stop during product changeovers to accommodate varying large-component heights without swapping cylinders.
When sizing this actuator, evaluate both neighboring bores to match your space and force requirements.
Choose this model if your application requires frequent on-site stroke tuning between 45 and 85 mm during changeovers. Confirm your setup needs the male M26x1.5 rod thread and the PT3/8 port. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the bumper only decelerates near the end of travel. For secure load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 5497.8 N and the pull to 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
Turning the M27x2.0 external screw shortens the extend end position by up to 40 mm, allowing you to set the stroke anywhere between 45 and 85 mm. This mechanism only sets the stop position and does not alter the force or act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.