
Genuine AirTAC adjustable mounting height stopper cylinder, order code TTG32X15C from the TTG32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TTG32X15C is the C option of the TTG32 range: a round rod stopper end, the simplest head form in the series, suited to contact with angled or irregular workpiece edges where a flat face would not seat cleanly. With a 15 mm stroke on the Dia 32 bore it gives a modest, controlled rise, sized against the impact load and speed charts in the catalog.
It follows the TTG32 fail-safe logic: single acting pull-in, so air retracts the rod and the spring pushes the stopper back up when the supply is cut. The unit flange mounts with adjustable stopper height, follows JIS standards, takes filtered air (40 um element) at 0.2-1.0 MPa through a PT1/8 port, handles 1.5 MPa (215 psi) proof pressure and -20 to +70 C, and requires no lubrication.
| Order code | TTG32X15C |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Round rod |
| Magnet | No magnet |
| Action | Single acting, spring extend |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.2-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TTG series specifications and ordering code.
Among 15 mm stroke versions, TTG32X15C differs from TTG32X15B (flat rod face), TTG32X15R (roller) and TTG32X15K (lever roller with adjustable oil cushion) by its round rod end, and from S-coded variants by having no magnet. Choose the C code for a simple point-contact stop on uneven or angled load edges; move to the K lever roller when the stop must be cushioned by the adjustable oil shock absorber, with the F self-lock option to keep the lever from pushing the stopped load backwards.
AirtacDistr lists every TTG32 order code with its price on one page at https://airtacdistr.com/products/airtac-ttg32-stopper-cylinder
A round rod end contacts slanted or rounded workpiece fronts at a point, avoiding the bridging and rocking a flat face can cause on irregular loads.
The 15 mm rise is enough to block travel between conveyor sections, and the spring lifts the stop automatically whenever air pressure is cut.
Flange mounting with adjustable height lets the stop be set to the load line on the machine frame, then locked in place for repeatable stopping.
Dia 32 mm bore, single acting spring extend (pull-in), 15 mm stroke with +1.0/0 mm tolerance, round rod stopper, no magnet, PT1/8 port, 0.2-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, 40 um air filtration, bumper cushion, no lubrication required, JIS standards, flange mounting with adjustable height.
It is a single acting pull-in cylinder: air only lowers the stopper, and the spring extends the rod to raise it. Cut the supply, whether deliberately or by a line failure, and the stopper rises, so workpieces on the conveyor are held rather than released. The spring also means no permanent air draw is needed to keep the stop up.