
Genuine AirTAC heavy duty stopper cylinder, order code TTH20X15SLF from the TTH range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TTH20X15SLF order code specifies the AirTAC TTH heavy-duty stopper cylinder with a Dia 20 mm bore and 15 mm stroke, flange mounted and single acting spring extend: air pulls the rod in, and cutting the air lets the spring push the lever roller back up so the stop rises if supply fails. The S option adds a magnet for position sensing, and the L stopper uses a lever roller with a fixed oil cushion.
The F self-lock stops the lever from springing back and pushing the stopped load backwards after impact. This bore runs on 0.25-1.0 MPa, the highest minimum pressure in the series, and a threaded M5x0.5 hole takes a proximity sensor. It works on air filtered by a 40 um element, needs no lubrication, and carries a proof pressure of 1.5 MPa (215 psi).
| Order code | TTH20X15SLF |
|---|---|
| Product | Heavy duty Stopper Cylinder |
| Bore | Ø20 mm, 15 mm stroke |
| Stopper | Lever roller, fixed oil cushion, self-lock |
| Magnet | Magnet |
| Action | Single acting, spring extend |
|---|---|
| Mounting | Flange |
| Bore / stroke | Ø20 15 mm · Ø25 15 mm · Ø32 20 mm · Ø40 30 mm · Ø50 30 mm · Ø63 30 mm · Ø80 40 mm |
| Port | M5×0.8 · PT1/8 · PT1/4 |
| Stopper types | Lever roller, fixed oil cushion, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0752..P0753), TTH series specifications and ordering code.
At Dia 20 mm the catalog offers a single 15 mm stroke and the fixed oil cushion L lever roller; the K adjustable cushion applies from Dia 32 mm up, so the real choice here is between TTH20X15LF (same stopper and self-lock, no magnet) and TTH20X15SL (magnet without self-lock). Pick this code when you need both sensor feedback and hold-against-kickback, and size the bore with the catalog maximum load charts, drawn for a friction coefficient of 0.1.
AirtacDistr lists every TTH order code with its price on one page at https://airtacdistr.com/products/airtac-tth-heavy-duty-stopper-cylinder
Stops pallets on a conveyor while the magnet lets a sensor in the M5x0.5 threaded hole report that the rod is pulled in and the line is passing product.
Because the TTH is spring extend, losing air raises the lever roller and stops the load; the self-lock then keeps it from springing back and shoving the load backwards.
The fixed oil cushion lever roller absorbs impact energy from incoming workpieces, and the thicker piston rod resists repeated stopping duty without lubrication.
Dia 20 mm bore, 15 mm stroke, single acting spring extend, flange mounting, port options M5x0.8, PT1/8 or PT1/4, operating pressure 0.25-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required, magnet fitted, lever roller with fixed oil cushion and self-lock.
The S magnet enables position detection via the M5x0.5 threaded sensor hole on Dia 20 mm bodies, so your control system can confirm rod state. The F self-lock is mechanical: it prevents the lever from springing back and pushing the stopped load backwards, independent of the air signal.